PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CC1562
CC1562 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.125 INCHES NOMINAL IN, aperture_width: 1.094 INCHES NOMINAL IN, overall_length: 3.563 INCHES NOMINAL IN, aperture_length: 1.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-127-2943, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC1562
NSN: 5330-00-127-2943
FSC: 5330
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialRUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.125 INCHES NOMINAL IN
aperture_width1.094 INCHES NOMINAL IN
overall_length3.563 INCHES NOMINAL IN
aperture_length1.375 INCHES NOMINAL IN
inside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
NSN5330-00-127-2943
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CC1562 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
APERTURE LENGTH: 1.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE WIDTH: 1.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
OVERALL LENGTH3.563 INCHES NOMINAL IN
APERTURE LENGTH1.375 INCHES NOMINAL IN
OVERALL WIDTH2.125 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALRUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE WIDTH1.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
1633-4Interchangeable
interchangeable cross-reference
interchangeable
580R584H04Interchangeable
interchangeable cross-reference
interchangeable
58404Interchangeable
interchangeable cross-reference
interchangeable
53153Interchangeable
interchangeable cross-reference
interchangeable
110 53/64Interchangeable
interchangeable cross-reference
interchangeable
7073376P3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC1562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC1562?
CC1562 is a GASKET.
What parts can replace CC1562?
There are 16 known substitutes for CC1562: 1633-4, 580R584H04, 58404 and 13 more. Substitute compatibility should be verified for your specific system.
Is CC1562 still available?
CC1562 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC1562

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026