PartsTable
Technical Data Sheet
Download PDF

CC-1986 PC 4 — SEAL,NONMETALLIC ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CC-1986 PC 4: SEAL,NONMETALLIC ANGLE.

The SEAL,NONMETALLIC ANGLE is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, end_item_identification: AIRCRAFT CARRIER CVN 69 EISENHOWERAIRCRAFT CARRIER CVN 69 EISENHOWER, cross-sectional_shape_style: L SHAPEL SHAPE, left_flange_thickness_at_toe: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN, left_flange_thickness_at_heel: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN, right/base_flange_thickness_at_toe: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-508-6567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC-1986 PC 4
NSN: 5330-01-508-6567
FSC: 5330 — Packing and Gasket Materials
CAGE: 21204 — CORNELL-CARR CO., INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
special_featuresFOR GLASS SIZE WIDTH TOP 46-7/16 IN,WIDTH BOTTOM 32-1/8 IN,HEIGTH 40-3/8 INFOR GLASS SIZE WIDTH TOP 46-7/16 IN,WIDTH BOTTOM 32-1/8 IN,HEIGTH 40-3/8 IN IN
end_item_identificationAIRCRAFT CARRIER CVN 69 EISENHOWERAIRCRAFT CARRIER CVN 69 EISENHOWER
cross-sectional_shape_styleL SHAPEL SHAPE
left_flange_thickness_at_toe0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
left_flange_thickness_at_heel0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
right/base_flange_thickness_at_toe0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
right/base_flange_thickness_at_heel0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
NSN5330-01-508-6567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CC-1986 PC 4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: L SHAPEL SHAPE
•
LEFT FLANGE THICKNESS AT TOE: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
•
RIGHT/BASE FLANGE THICKNESS AT HEEL: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
LEFT FLANGE THICKNESS AT HEEL: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
•
RIGHT/BASE FLANGE THICKNESS AT TOE: 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL SHAPE STYLEL SHAPEL SHAPE
LEFT FLANGE THICKNESS AT TOE0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
SPECIAL FEATURESFOR GLASS SIZE WIDTH TOP 46-7/16 IN,WIDTH BOTTOM 32-1/8 IN,HEIGTH 40-3/8 INFOR GLASS SIZE WIDTH TOP 46-7/16 IN,WIDTH BOTTOM 32-1/8 IN,HEIGTH 40-3/8 IN IN
RIGHT/BASE FLANGE THICKNESS AT HEEL0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
END ITEM IDENTIFICATIONAIRCRAFT CARRIER CVN 69 EISENHOWERAIRCRAFT CARRIER CVN 69 EISENHOWER
MATERIALRUBBER SYNTHETIC OVERALL
LEFT FLANGE THICKNESS AT HEEL0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
RIGHT/BASE FLANGE THICKNESS AT TOE0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CC-1986 PC 4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC-1986 PC 4?
CC-1986 PC 4 is a SEAL,NONMETALLIC ANGLE.
What is the NSN for CC-1986 PC 4?
CC-1986 PC 4 is cataloged in the U.S. Government catalog under NSN 5330-01-508-6567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC-1986 PC 4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.