PartsTable
Technical Data Sheet
PartsTable / MRO / CC-10
CC-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include width: 0.250 INCHES NOMINAL IN, height: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, length: 0.277 INCHES NOMINAL IN, material: CELLULOSE AND RESIN SYNTHETIC FILTERING MEDIUM, design_type: NONREUSABLE, temp_rating: 250.0 FAHRENHEIT MAXIMUM DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-132-3979, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CC-10
NSN: 5340-00-132-3979
FSC: 5340
CAGE: 23266 — SECS INC (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
height0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
length0.277 INCHES NOMINAL IN
materialCELLULOSE AND RESIN SYNTHETIC FILTERING MEDIUM
design_typeNONREUSABLE
temp_rating250.0 FAHRENHEIT MAXIMUM DEGF
power_sourceDIESEL ENGINE
body_diameter2.875 INCHES NOMINAL IN
drop_pressureERR-060
hole_diameter0.128 INCHES NOMINAL IN
roll_quantity2
rolling_width42.000 INCHES NOMINAL IN
NSN5340-00-132-3979
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CC-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
LENGTH: 0.276 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303
•
SURFACE TREATMENT: PASSIVATE
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
WIDTH: 0.250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
LENGTH0.276 INCHES NOMINAL IN
MATERIALSTEEL COMP 303
SURFACE TREATMENTPASSIVATE
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.128 INCHES NOMINAL IN
WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
252143Interchangeable
interchangeable cross-reference
interchangeable
YC6-2SInterchangeable
interchangeable cross-reference
interchangeable
C2Interchangeable
interchangeable cross-reference
interchangeable
CC-10Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-24005Interchangeable
interchangeable cross-reference
interchangeable
1CC10PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC-10?
CC-10 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace CC-10?
There are 9 known substitutes for CC-10: 252143, YC6-2S, C2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC-10?
CC-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-132-3979. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026