PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CC-0010711
CC-0010711 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL UNS K03104 OVERALL, head_style: FILLISTER, head_height: 0.430 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, thread_length: 1.19 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-617-2820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC-0010711
NSN: 5305-01-617-2820
FSC: 5305
CAGE: 1NWY2 — INDEPENDENT ROUGH TERRAIN CENTER LLC (USA)
SPECIFICATIONS
materialSTEEL UNS K03104 OVERALL
head_styleFILLISTER
head_height0.430 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
thread_length1.19 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
fastener_length1.19 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
end_item_identification3930-01-599-9978
nominal_thread_diameter0.4375 INCHES IN
NSN5305-01-617-2820
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: CC-0010711 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNRC
•
MATERIAL DOCUMENT AND CLASSIFICATION: PER ASTM A574 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
WIDTH ACROSS FLATS: 0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN
•
HEAD STYLE: FILLISTER
•
HEAD DIAMETER: 0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.19 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNRC
MATERIAL DOCUMENT AND CLASSIFICATIONPER ASTM A574 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
WIDTH ACROSS FLATS0.3750 INCHES MINIMUM AND 0.3790 INCHES MAXIMUM IN
END ITEM IDENTIFICATION3930-01-599-9978
HEAD STYLEFILLISTER
HEAD DIAMETER0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
FASTENER LENGTH1.19 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.4375 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
93357Interchangeable
interchangeable cross-reference
interchangeable
92979A118Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC-0010711?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC-0010711?
CC-0010711 is a SCREW,CAP,SOCKET HEAD.
What parts can replace CC-0010711?
There are 2 known substitutes for CC-0010711: 93357, 92979A118. Substitute compatibility should be verified for your specific system.
What is the NSN for CC-0010711?
CC-0010711 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-617-2820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC-0010711

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026