PartsTable
Technical Data Sheet
PartsTable / MRO / CC-001
CC-001 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE,CARTRIDGE is a the manufacturer industrial component. Key specifications include material: CERAMIC AND GLASS CASE, body_style: PIGTAIL TYPE, design_type: FRICTION, overall_length: 0.251 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, terminal_length: 1.500 INCHES NOMINAL IN, fragility_factor: MODERATELY RUGGED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-425-4609, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CC-001
NSN: 5340-00-425-4609
FSC: 5340
CAGE: 29724 — THERMODYNE INTERNATIONAL, LTD (USA)
SPECIFICATIONS
materialCERAMIC AND GLASS CASE
body_stylePIGTAIL TYPE
design_typeFRICTION
overall_length0.251 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
terminal_length1.500 INCHES NOMINAL IN
fragility_factorMODERATELY RUGGED
overall_diameter0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
features_providedNONRENEWABLE FUSIBLE ELEMENT
precious_materialGOLD
surface_treatmentGOLD TERMINAL
terminal_diameter0.025 INCHES NOMINAL IN
inside_diameter_length0.875 INCHES NOMINAL IN
NSN5340-00-425-4609
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CC-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 2.190 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: CAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
•
INSIDE DIAMETER LENGTH: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED2.190 INCHES NOMINAL IN
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
MATERIAL DOCUMENT AND CLASSIFICATIONCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
INSIDE DIAMETER LENGTH0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
017-021Interchangeable
interchangeable cross-reference
interchangeable
17-00057-002Interchangeable
interchangeable cross-reference
interchangeable
FM08A125V1/8AInterchangeable
interchangeable cross-reference
interchangeable
CC-001Interchangeable
interchangeable cross-reference
interchangeable
194-506-9001Interchangeable
Same NIIN cross-reference
interchangeable
10117356Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC-001?
CC-001 is a FUSE,CARTRIDGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace CC-001?
There are 6 known substitutes for CC-001: 017-021, 17-00057-002, FM08A125V1/8A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC-001?
CC-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-425-4609. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026