PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CC-0009886
CC-0009886 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 1.600 INCHES NOMINAL IN, hole_diameter: 7.500 INCHES NOMINAL IN, overall_diameter: 14.00 INCHES NOMINAL IN, special_features: MATERIAL: LOW CARBON STEEL, MINIMUM 350 HR WHITE RUST RESISTANCE WHEN TESTED PER ASTM B117; REFERENCE DIN 125 TYPE A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-484-4774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC-0009886
NSN: 5310-01-484-4774
FSC: 5310
CAGE: 1NWY2 — INDEPENDENT ROUGH TERRAIN CENTER LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness1.600 INCHES NOMINAL IN
hole_diameter7.500 INCHES NOMINAL IN
overall_diameter14.00 INCHES NOMINAL IN
special_featuresMATERIAL: LOW CARBON STEEL, MINIMUM 350 HR WHITE RUST RESISTANCE WHEN TESTED PER ASTM B117; REFERENCE DIN 125 TYPE A
NSN5310-01-484-4774
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CC-0009886 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 7.500 INCHES NOMINAL IN
•
OVERALL DIAMETER: 14.00 INCHES NOMINAL IN
•
THICKNESS: 1.600 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SPECIAL FEATURESMATERIAL: LOW CARBON STEEL, MINIMUM 350 HR WHITE RUST RESISTANCE WHEN TESTED PER ASTM B117; REFERENCE DIN 125 TYPE A
HOLE DIAMETER7.500 INCHES NOMINAL IN
OVERALL DIAMETER14.00 INCHES NOMINAL IN
THICKNESS1.600 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
2870Interchangeable
interchangeable cross-reference
interchangeable
A52490-4L870Interchangeable
interchangeable cross-reference
interchangeable
A-A-52490Interchangeable
interchangeable cross-reference
interchangeable
361-60094Interchangeable
interchangeable cross-reference
interchangeable
W8119088PC14Interchangeable
interchangeable cross-reference
interchangeable
C12A3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC-0009886?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC-0009886?
CC-0009886 is a WASHER,FLAT.
What parts can replace CC-0009886?
There are 17 known substitutes for CC-0009886: 2870, A52490-4L870, A-A-52490 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC-0009886?
CC-0009886 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-484-4774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC-0009886

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026