PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CC-0000057
CC-0000057 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 17.70 MILLIMETERS MINIMUM AND 19.00 MILLIMETERS MAXIMUM MM, thread_class: 6H, thread_direction: RIGHT-HAND, surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-616-0106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC-0000057
NSN: 5310-01-616-0106
FSC: 5310
CAGE: 1NWY2 — INDEPENDENT ROUGH TERRAIN CENTER LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height17.70 MILLIMETERS MINIMUM AND 19.00 MILLIMETERS MAXIMUM MM
thread_class6H
thread_seriesM
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats35.00 MILLIMETERS MINIMUM AND 36.00 MILLIMETERS MAXIMUM MM
nominal_thread_size24.0 MILLIMETERS MM
bearing_surface_typeCHAMFERED OR FLAT
end_item_identification3930-01-599-9978
specification/standard_dataD8286-DIN 934 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5310-01-616-0106
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CC-0000057 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: FE/ZN 3AT PER ASTM F1941M ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
•
THREAD SERIES: M
•
WIDTH ACROSS FLATS: 35.00 MILLIMETERS MINIMUM AND 36.00 MILLIMETERS MAXIMUM MM
•
BEARING SURFACE TYPE: CHAMFERED OR FLAT
•
THREAD CLASS: 6H
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONFE/ZN 3AT PER ASTM F1941M ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
THREAD SERIESM
WIDTH ACROSS FLATS35.00 MILLIMETERS MINIMUM AND 36.00 MILLIMETERS MAXIMUM MM
BEARING SURFACE TYPECHAMFERED OR FLAT
THREAD CLASS6H
END ITEM IDENTIFICATION3930-01-599-9978
NOMINAL THREAD SIZE24.0 MILLIMETERS MM
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
CA5211Interchangeable
interchangeable cross-reference
interchangeable
40315Interchangeable
interchangeable cross-reference
interchangeable
25179925000Interchangeable
interchangeable cross-reference
interchangeable
90-1250Interchangeable
interchangeable cross-reference
interchangeable
B-2016-OHInterchangeable
interchangeable cross-reference
interchangeable
8892400012-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC-0000057?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC-0000057?
CC-0000057 is a NUT,PLAIN,HEXAGON.
What parts can replace CC-0000057?
There are 13 known substitutes for CC-0000057: CA5211, 40315, 25179925000 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC-0000057?
CC-0000057 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-616-0106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC-0000057

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026