PartsTable
Technical Data Sheet
Download PDF

CBEA-LHN-BCC — VALVE,FLOW CONTROL

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

CBEA-LHN-BCC: VALVE,FLOW CONTROL.

The VALVE,FLOW CONTROL is a the manufacturer industrial component. Key specifications include body_material: ALUMINUM, seat_material: RUBBER SYNTHETIC, pressure_class: ERR-060, connection_type: THREADED INTERNAL PIPE, nominal_thread_size: 0.250 INCHES AND 0.500 INCHES IN, valve_operation_method: AUTOMATIC. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-433-8298, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CBEA-LHN-BCC
NSN: 4820-01-433-8298
FSC: 4820 — Valves, Nonpowered
CAGE: 54035 — SUN HYDRAULICS CORPORATION (USA)
SPECIFICATIONS
body_materialALUMINUM
seat_materialRUBBER SYNTHETIC
pressure_classERR-060
connection_typeTHREADED INTERNAL PIPE
nominal_thread_size0.250 INCHES AND 0.500 INCHES IN
valve_operation_methodAUTOMATIC
end_connection_quantity3
end_item_identificationNAVAL AIR SYSTEMS COMMAND A/S32M-17, CRANE HOIST MAINTENANCE
thread_series_designatorNPTF
NSN4820-01-433-8298
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: CBEA-LHN-BCC · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION TYPE: THREADED INTERNAL PIPE
•
END CONNECTION QUANTITY: 3
•
NOMINAL THREAD SIZE: 0.250 INCHES AND 0.500 INCHES IN
•
BODY MATERIAL: ALUMINUM
•
SEAT MATERIAL: RUBBER SYNTHETIC
•
PRESSURE CLASS: ERR-060
TECHNICAL CHARACTERISTICS
CONNECTION TYPETHREADED INTERNAL PIPE
END CONNECTION QUANTITY3
NOMINAL THREAD SIZE0.250 INCHES AND 0.500 INCHES IN
BODY MATERIALALUMINUM
SPECIAL FEATURESSTEEL VALVE CARTRIDGE; 30.0GPM; LOAD HOLDING 3000.0PSI;RANGE 1000.0 TO 4000.0PSI; MANUAL TYPE ADJUSTMENT; W/TWO MTG HOLE 0.42IN.DIA IN
SEAT MATERIALRUBBER SYNTHETIC
END ITEM IDENTIFICATIONNAVAL AIR SYSTEMS COMMAND A/S32M-17, CRANE HOIST MAINTENANCE
PRESSURE CLASSERR-060
THREAD SERIES DESIGNATORNPTF
VALVE OPERATION METHODAUTOMATIC
OTHER ITEMS IN FSC 4820 — Valves, Nonpowered
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4820-00-000-0097 4820-00-001-0010 4820-00-001-0020 4820-00-001-0021 4820-00-001-0032 4820-00-001-0037 4820-00-001-0042 4820-00-001-1230
SUBSTITUTES & CROSS-REFERENCES 2
3070AS519-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3070AS519Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CBEA-LHN-BCC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CBEA-LHN-BCC?
CBEA-LHN-BCC is a VALVE,FLOW CONTROL.
What parts can replace CBEA-LHN-BCC?
There are 2 known substitutes for CBEA-LHN-BCC: 3070AS519-1, 3070AS519. Substitute compatibility should be verified for your specific system.
What is the NSN for CBEA-LHN-BCC?
CBEA-LHN-BCC is cataloged in the U.S. Government catalog under NSN 4820-01-433-8298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CBEA-LHN-BCC