PartsTable
Technical Data Sheet
Download PDF

CB3001CRA3-10 — STANDOFF,THREADED,SNAP-IN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CB3001CRA3-10: STANDOFF,THREADED,SNAP-IN.

The STANDOFF,THREADED,SNAP-IN is a the manufacturer industrial component. Key specifications include length: 1.097 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING STANDOFF, thread_class: 3B FLANGE HOLE, thread_length: 0.625 INCHES NOMINAL FLANGE HOLE IN, flange_diameter: 1.250 INCHES NOMINAL IN, flange_thickness: 0.100 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-477-1076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CB3001CRA3-10
NSN: 5340-01-477-1076
FSC: 5340 — Hardware, Commercial
CAGE: 66530 — CLICK BOND INC (USA)
SPECIFICATIONS
length1.097 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING STANDOFF
thread_class3B FLANGE HOLE
thread_length0.625 INCHES NOMINAL FLANGE HOLE IN
flange_diameter1.250 INCHES NOMINAL IN
flange_thickness0.100 INCHES MAXIMUM IN
special_featuresMANUFACTURER NOMENCLATURE STANDOFF, LOCKING THREAD, ADHESIVE BONDED
style_designatorFLANGED WITH LEFT INTERNAL THREAD
thread_directionRIGHT-HAND FLANGE HOLE
surface_treatmentPASSIVATE STANDOFF
nominal_thread_size0.190 INCHES FLANGE HOLE IN
end_item_identificationCHINOOK
NSN5340-01-477-1076
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CB3001CRA3-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 1.250 INCHES NOMINAL IN
•
LENGTH: 1.097 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.100 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.625 INCHES NOMINAL FLANGE HOLE IN
•
STYLE DESIGNATOR: FLANGED WITH LEFT INTERNAL THREAD
•
THREAD DIRECTION: RIGHT-HAND FLANGE HOLE
•
NOMINAL THREAD SIZE: 0.190 INCHES FLANGE HOLE IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER1.250 INCHES NOMINAL IN
LENGTH1.097 INCHES NOMINAL IN
FLANGE THICKNESS0.100 INCHES MAXIMUM IN
THREAD LENGTH0.625 INCHES NOMINAL FLANGE HOLE IN
STYLE DESIGNATORFLANGED WITH LEFT INTERNAL THREAD
THREAD DIRECTIONRIGHT-HAND FLANGE HOLE
NOMINAL THREAD SIZE0.190 INCHES FLANGE HOLE IN
SPECIAL FEATURESMANUFACTURER NOMENCLATURE STANDOFF, LOCKING THREAD, ADHESIVE BONDED
SURFACE TREATMENTPASSIVATE STANDOFF
THREAD CLASS3B FLANGE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy CB3001CRA3-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CB3001CRA3-10?
CB3001CRA3-10 is a STANDOFF,THREADED,SNAP-IN.
What is the NSN for CB3001CRA3-10?
CB3001CRA3-10 is cataloged in the U.S. Government catalog under NSN 5340-01-477-1076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CB3001CRA3-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.