PartsTable
Technical Data Sheet
Download PDF

CB3001CR3-10P — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CB3001CR3-10P: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.625 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL, thread_class: 3B LEFT INTERNAL (INCLUDES THRU THREAD), flange_diameter: 1.250 INCHES NOMINAL IN, flange_thickness: 0.100 INCHES NOMINAL IN, style_designator: FLANGED LEFT INTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-698-3362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CB3001CR3-10P
NSN: 5340-01-698-3362
FSC: 5340 — Hardware, Commercial
CAGE: 66530 — CLICK BOND INC (USA)
SPECIFICATIONS
length0.625 INCHES NOMINAL IN
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
thread_class3B LEFT INTERNAL (INCLUDES THRU THREAD)
flange_diameter1.250 INCHES NOMINAL IN
flange_thickness0.100 INCHES NOMINAL IN
style_designatorFLANGED LEFT INTERNAL THREAD
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.1900 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeRECTANGULAR
cross-sectional_width0.900 INCHES NOMINAL IN
cross-sectional_length2.00 INCHES NOMINAL IN
NSN5340-01-698-3362
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CB3001CR3-10P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 1.250 INCHES NOMINAL IN
•
LENGTH: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED STD SINGLE TREATMENT RESPONSE OVERALL
•
FLANGE THICKNESS: 0.100 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.900 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGED LEFT INTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL LENGTH: 2.00 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER1.250 INCHES NOMINAL IN
LENGTH0.625 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED STD SINGLE TREATMENT RESPONSE OVERALL
FLANGE THICKNESS0.100 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.900 INCHES NOMINAL IN
STYLE DESIGNATORFLANGED LEFT INTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL LENGTH2.00 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.1900 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CB3001CR3-10P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CB3001CR3-10P?
CB3001CR3-10P is a STANDOFF,THREADED,SPACING.
What is the NSN for CB3001CR3-10P?
CB3001CR3-10P is cataloged in the U.S. Government catalog under NSN 5340-01-698-3362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CB3001CR3-10P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.