Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, special_features: ITEM MUST COMPLY WITH REQUIREMETSN OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD LO1530, center_hole_diameter: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5331-01-049-4102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
ITEM MUST COMPLY WITH REQUIREMETSN OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD LO1530
center_hole_diameter
0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
elongation_percentage
331 MAXIMUM
cross-sectional_height
0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN
5331-01-049-4102
COMPONENT DIAGRAM
KEY FEATURES
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
ELONGATION PERCENTAGE
331 MAXIMUM
CENTER HOLE DIAMETER
0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
TEMP RATING
-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HARDNESS RATING
70.0 SHORE DUROMETER A NOMINAL
SPECIAL FEATURES
ITEM MUST COMPLY WITH REQUIREMETSN OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD LO1530
TEST DATA DOCUMENT
81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CAT-2-111N674-7 0?
CAT-2-111N674-7 0 is a O-RING.
What parts can replace CAT-2-111N674-7 0?
There are 7 known substitutes for CAT-2-111N674-7 0: 2-111N219-70, 820-4446652-20, 2DY800 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CAT-2-111N674-7 0?
CAT-2-111N674-7 0 is cataloged in the Federal Logistics Information System under NSN 5331-01-049-4102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.