PartsTable
Technical Data Sheet
CA4 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,GLASS DIELECT. Key specifications include material: STEEL WHEEL RIM, body_style: PISTON, wheel_type: BUILT UP, plate_style: RECTANGULAR, tread_width: 0.812 INCHES NOMINAL IN, inclosure_type: ENCAPSULATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-806-0810, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL CA4
NSN: 5340-00-806-0810
FSC: 5340
CAGE: 02954 — PEPCO MANUFACTURING CO DIV PREMIER METALS (USA)
SPECIFICATIONS
materialSTEEL WHEEL RIM
body_stylePISTON
wheel_typeBUILT UP
plate_styleRECTANGULAR
tread_width0.812 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
wheel_diameter2.000 INCHES NOMINAL IN
wheel_quantity1
terminal_length0.862 INCHES NOMINAL IN
effective_height2.500 INCHES NOMINAL IN
overall_diameter0.313 INCHES NOMINAL IN
special_featuresCLOSED END OF DIELECTRIC TO BE UNSEALED CONSTRUCTION
NSN5340-00-806-0810
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CA4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STYLE DESIGNATOR: SWIVEL OFFSET
MATERIAL: PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) AND COTTON TREAD
WHEEL DIAMETER: 2.000 INCHES NOMINAL IN
WHEEL BEARING TYPE: PLAIN, SELF-LUBRICATED
SWIVEL BEARING ARRANGEMENT: ONE ROW
CASTER PLATE WIDTH: 1.875 INCHES NOMINAL IN
CASTER PLATE LENGTH: 2.562 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSWIVEL OFFSET
MATERIALPLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) AND COTTON TREAD
MATERIALSTEEL WHEEL RIM
WHEEL DIAMETER2.000 INCHES NOMINAL IN
WHEEL BEARING TYPEPLAIN, SELF-LUBRICATED
SWIVEL BEARING ARRANGEMENTONE ROW
CASTER PLATE WIDTH1.875 INCHES NOMINAL IN
CASTER PLATE LENGTH2.562 INCHES NOMINAL IN
EFFECTIVE HEIGHT2.500 INCHES NOMINAL IN
WHEEL TYPEBUILT UP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
CA4Interchangeable
interchangeable cross-reference
interchangeable
VCJ1014BInterchangeable
interchangeable cross-reference
interchangeable
1509-105023Interchangeable
interchangeable cross-reference
interchangeable
RR-F-191Interchangeable
interchangeable cross-reference
interchangeable
22-AD1Interchangeable
interchangeable cross-reference
interchangeable
29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CA4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA4?
CA4 is a CAPACITOR,VARIABLE,GLASS DIELECT. It is classified as a MRO (MRO_GENERAL).
What parts can replace CA4?
There are 6 known substitutes for CA4: CA4, VCJ1014B, 1509-105023 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CA4?
CA4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-806-0810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA4