PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CA368-8-70DUR0
CA368-8-70DUR0 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_depth: 1.000 INCHES NOMINAL IN, shank_length: 0.310 INCHES NOMINAL IN, hole_diameter: 0.620 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN, shank_diameter: 1.110 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-478-5743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA368-8-70DUR0
NSN: 5340-00-478-5743
FSC: 5340
CAGE: 22337 — BRIDGESTONE AMERICAS TIRE OPERATIONS, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_depth1.000 INCHES NOMINAL IN
shank_length0.310 INCHES NOMINAL IN
hole_diameter0.620 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
shank_diameter1.110 INCHES NOMINAL IN
style_designatorFLANGED RECESSED SHANK
material_hardness_rating70.0 DUROMETER NOMINAL
outside/top_flange_diameter1.620 INCHES NOMINAL IN
NSN5340-00-478-5743
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CA368-8-70DUR0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.110 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 1.620 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGED RECESSED SHANK
•
HOLE DEPTH: 1.000 INCHES NOMINAL IN
•
SHANK LENGTH: 0.310 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.620 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 70.0 DUROMETER NOMINAL
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
SHANK DIAMETER1.110 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.620 INCHES NOMINAL IN
STYLE DESIGNATORFLANGED RECESSED SHANK
HOLE DEPTH1.000 INCHES NOMINAL IN
SHANK LENGTH0.310 INCHES NOMINAL IN
HOLE DIAMETER0.620 INCHES NOMINAL IN
MATERIAL HARDNESS RATING70.0 DUROMETER NOMINAL
MATERIALRUBBER SYNTHETIC
OVERALL HEIGHT1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
140-1784-03-01-00Interchangeable
interchangeable cross-reference
interchangeable
1131H-CInterchangeable
interchangeable cross-reference
interchangeable
10-402-3Interchangeable
interchangeable cross-reference
interchangeable
R478Interchangeable
interchangeable cross-reference
interchangeable
SCB98652REVCInterchangeable
interchangeable cross-reference
interchangeable
10350157Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CA368-8-70DUR0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA368-8-70DUR0?
CA368-8-70DUR0 is a BUMPER.
What parts can replace CA368-8-70DUR0?
There are 8 known substitutes for CA368-8-70DUR0: 140-1784-03-01-00, 1131H-C, 10-402-3 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CA368-8-70DUR0?
CA368-8-70DUR0 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-478-5743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA368-8-70DUR0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026