CA28117-08-9HS — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

CA28117-08-9HS: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING STUD, drive_type: SOCKET, eyelet_length: 0.790 INCHES NOMINAL IN, stud_assembly_style: STUD ASSEMBLY, securing_device_type: SPRING AND WASHER. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-417-5247, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

CA28117-08-9HS

NSN: 5325-01-417-5247
FSC: 5325 — Fastening Devices
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)

SPECIFICATIONS

diameter	0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
material	STEEL CORROSION RESISTING STUD
drive_type	SOCKET
eyelet_length	0.790 INCHES NOMINAL IN
stud_assembly_style	STUD ASSEMBLY
securing_device_type	SPRING AND WASHER
eyelet_outside_diameter	0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
turnlock_stud_head_style	FLAT FILLISTER
material_accommodated_thickness	0.790 INCHES NOMINAL IN
stud_thread_size_and_series/type_designator	0.164-32 UNIFIED NATIONAL COARSE (UNC)
distance_from_engaging_member_to_largest_bearing_surface_of_head	1.372 INCHES NOMINAL IN
NSN	5325-01-417-5247

COMPONENT DIAGRAM

KEY FEATURES

•

EYELET OUTSIDE DIAMETER: 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN

•

DRIVE TYPE: SOCKET

•

MATERIAL ACCOMMODATED THICKNESS: 0.790 INCHES NOMINAL IN

•

DIAMETER: 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN

•

SECURING DEVICE TYPE: SPRING AND WASHER

•

DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD: 1.372 INCHES NOMINAL IN

•

TURNLOCK STUD HEAD STYLE: FLAT FILLISTER

•

MATERIAL: STEEL CORROSION RESISTING STUD

TECHNICAL CHARACTERISTICS

EYELET OUTSIDE DIAMETER	0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
DRIVE TYPE	SOCKET
MATERIAL ACCOMMODATED THICKNESS	0.790 INCHES NOMINAL IN
DIAMETER	0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
SECURING DEVICE TYPE	SPRING AND WASHER
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD	1.372 INCHES NOMINAL IN
TURNLOCK STUD HEAD STYLE	FLAT FILLISTER
MATERIAL	STEEL CORROSION RESISTING STUD
MATERIAL	STEEL CORROSION RESISTING HOUSING
MATERIAL	STEEL COMP 302 WASHER

OTHER ITEMS IN FSC 5325 — Fastening Devices

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317

SUBSTITUTES & CROSS-REFERENCES 2

5943113-001Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

FT1433HS-8-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy CA28117-08-9HS?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CA28117-08-9HS?

CA28117-08-9HS is a STUD ASSEMBLY,TURNLOCK FASTENER.

What parts can replace CA28117-08-9HS?

There are 2 known substitutes for CA28117-08-9HS: 5943113-001, FT1433HS-8-9. Substitute compatibility should be verified for your specific system.

What is the NSN for CA28117-08-9HS?

CA28117-08-9HS is cataloged in the U.S. Government catalog under NSN 5325-01-417-5247. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CA28117-08-9HS — STUD ASSEMBLY,TURNLOCK FASTENER

Request a Quote — CA28117-08-9HS