PartsTable
Technical Data Sheet
Download PDF

CA2730-4-16 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

CA2730-4-16: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, head_style: PAN NO. 2, head_height: 0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN, thread_length: 0.300 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-061-9137, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA2730-4-16
NSN: 5305-00-061-9137
FSC: 5305 — Screws
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
head_stylePAN NO. 2
head_height0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
thread_length0.300 INCHES NOMINAL IN
fastener_length1.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
NSN5305-00-061-9137
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: CA2730-4-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.438 INCHES NOMINAL IN
•
THREAD LENGTH: 0.300 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
HEAD HEIGHT0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
FASTENER LENGTH1.438 INCHES NOMINAL IN
THREAD LENGTH0.300 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
THREAD QUANTITY PER INCH28
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
AS104-04-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CA2730-4-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA2730-4-16?
CA2730-4-16 is a SCREW,CAP,SOCKET HEAD.
What parts can replace CA2730-4-16?
There is 1 known substitute for CA2730-4-16: AS104-04-16. Substitute compatibility should be verified for your specific system.
What is the NSN for CA2730-4-16?
CA2730-4-16 is cataloged in the U.S. Government catalog under NSN 5305-00-061-9137. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA2730-4-16