PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CA24641
CA24641 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL INTERNALLY MOLDED-IN REINFORCEMENT, seal_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, construction: SOLID, housing_bore_diameter: 2.252 INCHES MINIMUM AND 2.256 INCHES MAXIMUM IN, accommodated_shaft_diameter: 1.436 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-584-2048, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA24641
NSN: 5330-00-584-2048
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
seal_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
constructionSOLID
housing_bore_diameter2.252 INCHES MINIMUM AND 2.256 INCHES MAXIMUM IN
accommodated_shaft_diameter1.436 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
NSN5330-00-584-2048
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CA24641 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 1.436 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 2.252 INCHES MINIMUM AND 2.256 INCHES MAXIMUM IN
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.436 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
HOUSING BORE DIAMETER2.252 INCHES MINIMUM AND 2.256 INCHES MAXIMUM IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
CONSTRUCTIONSOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
46009Interchangeable
interchangeable cross-reference
interchangeable
106339Interchangeable
interchangeable cross-reference
interchangeable
123SEAV10490-103Interchangeable
interchangeable cross-reference
interchangeable
10066Interchangeable
interchangeable cross-reference
interchangeable
50647Interchangeable
interchangeable cross-reference
interchangeable
1123241Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CA24641?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA24641?
CA24641 is a SEAL,PLAIN.
What parts can replace CA24641?
There are 6 known substitutes for CA24641: 46009, 106339, 123SEAV10490-103 and 3 more. Substitute compatibility should be verified for your specific system.
Is CA24641 still available?
CA24641 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA24641

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026