PartsTable
Technical Data Sheet
Download PDF

CA2210-10W — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CA2210-10W: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, recess_depth: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN, hole_diameter: 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN, recess_diameter: 0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, outside_diameter: 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN, surface_treatment: CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-406-1233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA2210-10W
NSN: 5310-01-406-1233
FSC: 5310 — Nuts and Washers
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
recess_depth0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
hole_diameter0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
recess_diameter0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
outside_diameter0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
surface_treatmentCHROMATE OVERALL
material_thickness0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-406-1233
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CA2210-10W · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
•
RECESS DEPTH: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CHROMATE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
RECESS DEPTH0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
MATERIAL THICKNESS0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
RECESS DIAMETER0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
HOLE DIAMETER0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
3M901A10WSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3M901-10WReference document
Same NSN cross-reference
Reference document — Secondary reference
CA21062-10WReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CA2210-10W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA2210-10W?
CA2210-10W is a WASHER,RECESSED.
What parts can replace CA2210-10W?
There are 3 known substitutes for CA2210-10W: 3M901A10W, 3M901-10W, CA21062-10W. Substitute compatibility should be verified for your specific system.
What is the NSN for CA2210-10W?
CA2210-10W is cataloged in the U.S. Government catalog under NSN 5310-01-406-1233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA2210-10W

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.