PartsTable
Technical Data Sheet
Download PDF

CA17034-5 — NUT,PLAIN,KNURLED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CA17034-5: NUT,PLAIN,KNURLED.

The NUT,PLAIN,KNURLED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_class: INTERNAL, thread_series: UNF, thread_direction: RIGHT-HAND, nominal_thread_size: 0.190 INCHES IN, hole_type_and_quantity: 1 DRILLED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-672-2348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA17034-5
NSN: 5310-01-672-2348
FSC: 5310 — Nuts and Washers
CAGE: 5R793 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_classINTERNAL
thread_seriesUNF
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
hole_type_and_quantity1 DRILLED
part_name_assigned_by_controlling_agencySTUD NUT KNURLED AND HEX RECESS
NSN5310-01-672-2348
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CA17034-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD CLASS: INTERNAL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE TYPE AND QUANTITY: 1 DRILLED
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSTUD NUT KNURLED AND HEX RECESS
THREAD CLASSINTERNAL
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE TYPE AND QUANTITY1 DRILLED
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
NV1017493 FIND NO. 5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CA17034-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA17034-5?
CA17034-5 is a NUT,PLAIN,KNURLED.
What parts can replace CA17034-5?
There is 1 known substitute for CA17034-5: NV1017493 FIND NO. 5. Substitute compatibility should be verified for your specific system.
What is the NSN for CA17034-5?
CA17034-5 is cataloged in the U.S. Government catalog under NSN 5310-01-672-2348. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA17034-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.