PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C98PTF
C98PTF ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 8.00 MILLIMETERS NOMINAL MM, overall_width: 7.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-563-0533, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C98PTF
NSN: 3110-00-563-0533
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter8.00 MILLIMETERS NOMINAL MM
overall_width7.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter22.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-563-0533
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C98PTF · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 22.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 8.00 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER22.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
BORE DIAMETER8.00 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
SHIELD QUANTITY1
BORE SHAPESTRAIGHT
OVERALL WIDTH7.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
KR8S15Interchangeable
interchangeable cross-reference
interchangeable
703-8Interchangeable
interchangeable cross-reference
interchangeable
10-16666Interchangeable
interchangeable cross-reference
interchangeable
BB5211Interchangeable
interchangeable cross-reference
interchangeable
7038X1CInterchangeable
interchangeable cross-reference
interchangeable
6016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C98PTF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C98PTF?
C98PTF is a BEARING,BALL,ANNULAR.
What parts can replace C98PTF?
There are 22 known substitutes for C98PTF: KR8S15, 703-8, 10-16666 and 19 more. Substitute compatibility should be verified for your specific system.
Is C98PTF still available?
C98PTF is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C98PTF

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026