PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C91080A1PC292
C91080A1PC292 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 9.000 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 7.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-1994, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C91080A1PC292
NSN: 5330-00-154-1994
FSC: 5330
CAGE: 81600 — NEW YORK NAVAL SHIPYARD NAVAL BASE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter9.000 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter7.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-1994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C91080A1PC292 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 9.000 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 7.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER9.000 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER7.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.625 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
13323Interchangeable
interchangeable cross-reference
interchangeable
GT825DJ1Interchangeable
interchangeable cross-reference
interchangeable
96SC1006-1Interchangeable
interchangeable cross-reference
interchangeable
9591828Interchangeable
interchangeable cross-reference
interchangeable
3758708Interchangeable
interchangeable cross-reference
interchangeable
61449Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C91080A1PC292?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C91080A1PC292?
C91080A1PC292 is a SEAL,PLAIN ENCASED.
What parts can replace C91080A1PC292?
There are 13 known substitutes for C91080A1PC292: 13323, GT825DJ1, 96SC1006-1 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C91080A1PC292?
C91080A1PC292 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-1994. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C91080A1PC292

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026