PartsTable
Technical Data Sheet
Download PDF

C8951-3 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C8951-3: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: PLASTIC POLYVINYLIDENE FLUORIDE INSULATION, cup_width: 1.5000 INCHES NOMINAL IN, cone_width: 1.8900 INCHES NOMINAL IN, bore_diameter: 3.8756 INCHES NOMINAL IN, overall_width: 1.8750 INCHES NOMINAL IN, overall_length: 0.750 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-4417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C8951-3
NSN: 3110-00-100-4417
NIINs: 001004417, 013054713
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYLIDENE FLUORIDE INSULATION
cup_width1.5000 INCHES NOMINAL IN
cone_width1.8900 INCHES NOMINAL IN
bore_diameter3.8756 INCHES NOMINAL IN
overall_width1.8750 INCHES NOMINAL IN
overall_length0.750 INCHES IN
standout_width0.3750 INCHES NOMINAL IN
special_features0.300 IN. INSIDE DIA IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
basic_shape_styleHEAT SHRINKABLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
NSN3110-00-100-4417
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C8951-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 7.1250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.3750 INCHES NOMINAL IN
•
CONE WIDTH: 1.8900 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.5000 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.8750 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER7.1250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.3750 INCHES NOMINAL IN
CONE WIDTH1.8900 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER3.8756 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
779-772Reference document
Same NSN cross-reference
Reference document — Secondary reference
772-779Reference document
Same NSN cross-reference
Reference document — Secondary reference
295721Reference document
Same NSN cross-reference
Reference document — Secondary reference
5556169Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS19081-263Reference document
Same NSN cross-reference
Reference document — Secondary reference
5556172Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C8951-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C8951-3?
C8951-3 is a BEARING,ROLLER,TAPERED.
What parts can replace C8951-3?
There are 6 known substitutes for C8951-3: 779-772, 772-779, 295721 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C8951-3?
C8951-3 is cataloged in the U.S. Government catalog under NSN 3110-00-100-4417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C8951-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.