PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C87502X1E4
C87502X1E4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 0.5903 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN, overall_width: 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, surface_finish: GROUND, inner_ring_width: 0.4750 INCHES MINIMUM AND 0.4800 INCHES MAXIMUM IN, outer_ring_width: 0.4281 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-124-1341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C87502X1E4
NSN: 3110-00-124-1341
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter0.5903 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN
overall_width0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
surface_finishGROUND
shield_quantity2
inner_ring_width0.4750 INCHES MINIMUM AND 0.4800 INCHES MAXIMUM IN
outer_ring_width0.4281 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0007 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
bearing_preload_rating2.2 POUNDS NOMINAL LBS
overall_outside_diameter1.3775 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
NSN3110-00-124-1341
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C87502X1E4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.4281 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN
•
INNER RING WIDTH: 0.4750 INCHES MINIMUM AND 0.4800 INCHES MAXIMUM IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.4281 INCHES MINIMUM AND 0.4331 INCHES MAXIMUM IN
INNER RING WIDTH0.4750 INCHES MINIMUM AND 0.4800 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
SHIELD QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALGREASE
BORE DIAMETER0.5903 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN
INTERNAL CLEARANCE0.0001 INCHES MINIMUM RADIAL AND 0.0007 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
202KLDFS10160SInterchangeable
interchangeable cross-reference
interchangeable
22-2002Interchangeable
interchangeable cross-reference
interchangeable
202LDFS10160XInterchangeable
interchangeable cross-reference
interchangeable
22200Interchangeable
interchangeable cross-reference
interchangeable
22200-1Interchangeable
interchangeable cross-reference
interchangeable
10314224Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C87502X1E4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C87502X1E4?
C87502X1E4 is a BEARING,BALL,ANNULAR.
What parts can replace C87502X1E4?
There are 10 known substitutes for C87502X1E4: 202KLDFS10160S, 22-2002, 202LDFS10160X and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C87502X1E4?
C87502X1E4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-124-1341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C87502X1E4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026