PartsTable
Technical Data Sheet
Download PDF

C8111-8-4 — NUT,SHEET SPRING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C8111-8-4: NUT,SHEET SPRING.

The NUT,SHEET SPRING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SHEET SPRING, nut_width: 0.410 INCHES NOMINAL IN, nut_length: 0.670 INCHES NOMINAL IN, panel_thickness: 0.045 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, surface_treatment: PHOSPHATE AND OIL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-789-6256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C8111-8-4
NSN: 5310-00-789-6256
FSC: 5310 — Nuts and Washers
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSHEET SPRING
nut_width0.410 INCHES NOMINAL IN
nut_length0.670 INCHES NOMINAL IN
panel_thickness0.045 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE AND OIL OVERALL
material_thickness0.028 INCHES NOMINAL IN
mating_member_diameter_accommodated0.164 INCHES NOMINAL IN
NSN5310-00-789-6256
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C8111-8-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.410 INCHES NOMINAL IN
•
NUT LENGTH: 0.670 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.028 INCHES NOMINAL IN
•
PANEL THICKNESS: 0.045 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.164 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE AND OIL OVERALL
•
NUT STYLE: SHEET SPRING
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NUT WIDTH0.410 INCHES NOMINAL IN
NUT LENGTH0.670 INCHES NOMINAL IN
MATERIAL THICKNESS0.028 INCHES NOMINAL IN
PANEL THICKNESS0.045 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
MATING MEMBER DIAMETER ACCOMMODATED0.164 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE AND OIL OVERALL
NUT STYLESHEET SPRING
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
154248Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C8111-8-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C8111-8-4?
C8111-8-4 is a NUT,SHEET SPRING.
What parts can replace C8111-8-4?
There is 1 known substitute for C8111-8-4: 154248. Substitute compatibility should be verified for your specific system.
What is the NSN for C8111-8-4?
C8111-8-4 is cataloged in the U.S. Government catalog under NSN 5310-00-789-6256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C8111-8-4