PartsTable
Technical Data Sheet
Download PDF

C7AZ4676A — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C7AZ4676A: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: FLANGED, seal_width: 0.438 INCHES NOMINAL IN, outside_diameter: 2.781 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.777 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-220-1774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7AZ4676A
NSN: 5330-00-220-1774
FSC: 5330 — Packing and Gasket Materials
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleFLANGED
seal_width0.438 INCHES NOMINAL IN
outside_diameter2.781 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.777 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.250 INCHES NOMINAL IN
NSN5330-00-220-1774
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C7AZ4676A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 2.781 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.777 INCHES NOMINAL IN
•
CASE STYLE: FLANGED
•
ACCOMMODATED SHAFT DIAMETER: 3.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.781 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.777 INCHES NOMINAL IN
CASE STYLEFLANGED
ACCOMMODATED SHAFT DIAMETER3.250 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 5
9190BJ1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D9AZ4676-AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
K9190BJ3Reference document
Same NSN cross-reference
Reference document — Secondary reference
18190Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9190NReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C7AZ4676A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7AZ4676A?
C7AZ4676A is a SEAL,PLAIN ENCASED.
What parts can replace C7AZ4676A?
There are 5 known substitutes for C7AZ4676A: 9190BJ1, D9AZ4676-A, K9190BJ3 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C7AZ4676A?
C7AZ4676A is cataloged in the U.S. Government catalog under NSN 5330-00-220-1774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7AZ4676A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.