PartsTable
Technical Data Sheet
Download PDF

C7998-1420-24B — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C7998-1420-24B: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1108, overall_width: 0.531 INCHES NOMINAL IN, overall_height: 0.417 INCHES NOMINAL IN, overall_length: 0.540 INCHES NOMINAL IN, style_designator: CLIP, material_thickness: 0.020 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-021-0066, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7998-1420-24B
NSN: 5340-00-021-0066
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 1108
overall_width0.531 INCHES NOMINAL IN
overall_height0.417 INCHES NOMINAL IN
overall_length0.540 INCHES NOMINAL IN
style_designatorCLIP
material_thickness0.020 INCHES NOMINAL IN
material_document_and_classificationSAE 1108 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-021-0066
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C7998-1420-24B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1108 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1108
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.417 INCHES NOMINAL IN
STYLE DESIGNATORCLIP
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1108 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.540 INCHES NOMINAL IN
OVERALL WIDTH0.531 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
MATERIALSTEEL COMP 1108
SUBSTITUTES & CROSS-REFERENCES 4
C7998-1420-3BReference document
Same NSN cross-reference
Reference document — Secondary reference
EFCN-D07998-1420-3BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
137496002Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
0510-0022Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C7998-1420-24B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7998-1420-24B?
C7998-1420-24B is a RETAINER,NUT AND BOLT.
What parts can replace C7998-1420-24B?
There are 4 known substitutes for C7998-1420-24B: C7998-1420-3B, EFCN-D07998-1420-3B, 137496002 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C7998-1420-24B?
C7998-1420-24B is cataloged in the U.S. Government catalog under NSN 5340-00-021-0066. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7998-1420-24B