PartsTable
Technical Data Sheet
Download PDF

C7984 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

C7984: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.750 INCHES NOMINAL IN, head_height: 0.108 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-240-1278, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7984
NSN: 5305-01-240-1278
NIINs: 012401278, 016699145, 016924567, 016925440, 017001459, 017009288, 017065519, 017067686
FSC: 5305 — Screws
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.750 INCHES NOMINAL IN
head_height0.108 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN
head_diameter0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.370 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES OVERALL
fastener_length1.105 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5305-01-240-1278
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C7984 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 0.996 INCHES MINIMUM AND 1.026 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.298 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH0.996 INCHES MINIMUM AND 1.026 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.298 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
SUBSTITUTES & CROSS-REFERENCES 5
C7984-3-11Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
VT1693-3-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
V044-3-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
H044-3-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
AIC984-3-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C7984?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7984?
C7984 is a SCREW,CLOSE TOLERANCE.
What parts can replace C7984?
There are 5 known substitutes for C7984: C7984-3-11, VT1693-3-11, V044-3-11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C7984?
C7984 is cataloged in the U.S. Government catalog under NSN 5305-01-240-1278. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7984

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.