PartsTable
Technical Data Sheet
Download PDF

C7951-1024-3B — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C7951-1024-3B: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_height: 0.380 INCHES NOMINAL IN, nut_length: 0.520 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-478-6511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7951-1024-3B
NSN: 5310-01-478-6511
FSC: 5310 — Nuts and Washers
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_height0.380 INCHES NOMINAL IN
nut_length0.520 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
nominal_thread_size0.190 INCHES IN
end_item_identification6115-01-431-3063;GENERATOR SET,DIESEL ENGINE
thread_quantity_per_inch24
NSN5310-01-478-6511
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C7951-1024-3B · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.520 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.380 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
NUT LENGTH0.520 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.380 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
THREAD CLASS2B
END ITEM IDENTIFICATION6115-01-431-3063;GENERATOR SET,DIESEL ENGINE
THREAD QUANTITY PER INCH24
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
88-21674-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
88-21674Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C7951-1024-3B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7951-1024-3B?
C7951-1024-3B is a NUT,PLAIN,CLINCH.
What parts can replace C7951-1024-3B?
There are 2 known substitutes for C7951-1024-3B: 88-21674-4, 88-21674. Substitute compatibility should be verified for your specific system.
What is the NSN for C7951-1024-3B?
C7951-1024-3B is cataloged in the U.S. Government catalog under NSN 5310-01-478-6511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7951-1024-3B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.