PartsTable
Technical Data Sheet
Download PDF

C792-3-4 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

C792-3-4: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN, thread_length: 0.338 INCHES MINIMUM IN, screw_material: TITANIUM ALLOY, fastener_length: 0.588 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-915-4763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C792-3-4
NSN: 5305-00-915-4763
FSC: 5305 — Screws
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
thread_length0.338 INCHES MINIMUM IN
screw_materialTITANIUM ALLOY
fastener_length0.588 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleTORQUE SET
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-00-915-4763
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C792-3-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.588 INCHES NOMINAL IN
•
THREAD LENGTH: 0.338 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: TITANIUM ALLOY
•
INTERNAL DRIVE STYLE: TORQUE SET
•
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.588 INCHES NOMINAL IN
THREAD LENGTH0.338 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALTITANIUM ALLOY
INTERNAL DRIVE STYLETORQUE SET
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD CLASS3A A
THREAD QUANTITY PER INCH32
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 4
CS663-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
AIC792-3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
64228V3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
VT1040-3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C792-3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C792-3-4?
C792-3-4 is a SCREW,MACHINE.
What parts can replace C792-3-4?
There are 4 known substitutes for C792-3-4: CS663-4, AIC792-3-4, 64228V3-4 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C792-3-4?
C792-3-4 is cataloged in the U.S. Government catalog under NSN 5305-00-915-4763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C792-3-4