PartsTable
Technical Data Sheet
Download PDF

C7592A3AA2 — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C7592A3AA2: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 BRACKET, nut_style: SPLINE (FLOATING), nut_height: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, nut_length: 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, pilot_length: 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-260-9845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7592A3AA2
NSN: 5310-01-260-9845
FSC: 5310 — Nuts and Washers
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 BRACKET
nut_styleSPLINE (FLOATING)
nut_height0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
nut_length0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
pilot_length0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
pilot_diameter0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
special_featuresBRACKET HARDNESS ROCKWELL C SCALE 47.0 MAX; NUT TENSILE STRENGTH 160000 PSI MIN
thread_directionRIGHT-HAND
NSN5310-01-260-9845
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C7592A3AA2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.390 INCHES NOMINAL IN
•
NUT LENGTH: 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE BOSS
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.390 INCHES NOMINAL IN
NUT LENGTH0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TYPE 2,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE BOSS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BRACKET
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE BOSS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-5085 ASSN STD SINGLE MATERIAL RESPONSE BRACKET
FEATURES PROVIDEDFLOATING NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
FGD6010L10-AA-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
FT5195-10-5-2PSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FGD6010-10-AA-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C7592A3AA2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7592A3AA2?
C7592A3AA2 is a NUT,SELF-LOCKING,SPLINE.
What parts can replace C7592A3AA2?
There are 3 known substitutes for C7592A3AA2: FGD6010L10-AA-2, FT5195-10-5-2P, FGD6010-10-AA-2. Substitute compatibility should be verified for your specific system.
What is the NSN for C7592A3AA2?
C7592A3AA2 is cataloged in the U.S. Government catalog under NSN 5310-01-260-9845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7592A3AA2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.