PartsTable
Technical Data Sheet
Download PDF

C7494-632-4 — NUT,SHEET SPRING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C7494-632-4: NUT,SHEET SPRING.

The NUT,SHEET SPRING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_width: 0.280 INCHES NOMINAL IN, nut_height: 0.270 INCHES NOMINAL IN, nut_length: 0.330 INCHES NOMINAL IN, surface_treatment: PHOSPHATE OVERALL, material_thickness: 0.017 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-063-5069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7494-632-4
NSN: 5310-01-063-5069
FSC: 5310 — Nuts and Washers
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_width0.280 INCHES NOMINAL IN
nut_height0.270 INCHES NOMINAL IN
nut_length0.330 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
material_thickness0.017 INCHES NOMINAL IN
mating_member_diameter_accommodated0.138 INCHES NOMINAL IN
NSN5310-01-063-5069
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C7494-632-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.280 INCHES NOMINAL IN
•
NUT LENGTH: 0.330 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.017 INCHES NOMINAL IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.138 INCHES NOMINAL IN
•
NUT HEIGHT: 0.270 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NUT WIDTH0.280 INCHES NOMINAL IN
NUT LENGTH0.330 INCHES NOMINAL IN
MATERIAL THICKNESS0.017 INCHES NOMINAL IN
MATING MEMBER DIAMETER ACCOMMODATED0.138 INCHES NOMINAL IN
NUT HEIGHT0.270 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
2810-09-0002Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
H2062Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C7494-632-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7494-632-4?
C7494-632-4 is a NUT,SHEET SPRING.
What parts can replace C7494-632-4?
There are 2 known substitutes for C7494-632-4: 2810-09-0002, H2062. Substitute compatibility should be verified for your specific system.
What is the NSN for C7494-632-4?
C7494-632-4 is cataloged in the U.S. Government catalog under NSN 5310-01-063-5069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7494-632-4