PartsTable
Technical Data Sheet
Download PDF

C7449-5 — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

C7449-5: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, material: STEEL COMP 1118 OVERALL, drive_type: SLOTTED, eyelet_length: 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, stud_diameter: 0.212 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, stud_head_height: 0.285 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-251-2007, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7449-5
NSN: 5325-01-251-2007
FSC: 5325 — Fastening Devices
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
diameter0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
materialSTEEL COMP 1118 OVERALL
drive_typeSLOTTED
eyelet_length0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
stud_diameter0.212 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
stud_head_height0.285 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
stud_assembly_styleSTUD ASSEMBLY
eyelet_outside_diameter0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
turnlock_stud_head_styleFLAT FILLISTER
material_accommodated_thickness0.104 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-01-251-2007
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C7449-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EYELET OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
DRIVE TYPE: SLOTTED
•
MATERIAL ACCOMMODATED THICKNESS: 0.104 INCHES NOMINAL IN
•
DIAMETER: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
STUD HEAD HEIGHT: 0.285 INCHES NOMINAL IN
•
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD: 0.380 INCHES NOMINAL IN
•
TURNLOCK STUD HEAD STYLE: FLAT FILLISTER
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EYELET OUTSIDE DIAMETER0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
DRIVE TYPESLOTTED
MATERIAL ACCOMMODATED THICKNESS0.104 INCHES NOMINAL IN
DIAMETER0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
STUD HEAD HEIGHT0.285 INCHES NOMINAL IN
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.380 INCHES NOMINAL IN
TURNLOCK STUD HEAD STYLEFLAT FILLISTER
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1118 OVERALL
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 2
PFSC3-1/2-42AReference document
Same NSN cross-reference
Reference document — Secondary reference
3506-SC42A-Z3YReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C7449-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7449-5?
C7449-5 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace C7449-5?
There are 2 known substitutes for C7449-5: PFSC3-1/2-42A, 3506-SC42A-Z3Y. Substitute compatibility should be verified for your specific system.
What is the NSN for C7449-5?
C7449-5 is cataloged in the U.S. Government catalog under NSN 5325-01-251-2007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7449-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.