PartsTable
Technical Data Sheet
Download PDF

C692-1603-ECHG-A11 — STOP,MECHANICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C692-1603-ECHG-A11: STOP,MECHANICAL.

The STOP,MECHANICAL is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, design_type: FLANGE, overall_width: 1.300 INCHES NOMINAL IN, overall_height: 2.440 INCHES NOMINAL IN, overall_length: 6.125 INCHES NOMINAL IN, flange_thickness: 3.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-493-1722, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C692-1603-ECHG-A11
NSN: 5340-01-493-1722
FSC: 5340 — Hardware, Commercial
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialCOPPER ALLOY
design_typeFLANGE
overall_width1.300 INCHES NOMINAL IN
overall_height2.440 INCHES NOMINAL IN
overall_length6.125 INCHES NOMINAL IN
flange_thickness3.500 INCHES NOMINAL IN
end_item_identificationUSED WITH HANDLING GEAR ON SEAWOLF CLASS
NSN5340-01-493-1722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C692-1603-ECHG-A11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 3.500 INCHES NOMINAL IN
•
DESIGN TYPE: FLANGE
•
MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.440 INCHES NOMINAL IN
FLANGE THICKNESS3.500 INCHES NOMINAL IN
DESIGN TYPEFLANGE
OVERALL LENGTH6.125 INCHES NOMINAL IN
OVERALL WIDTH1.300 INCHES NOMINAL IN
END ITEM IDENTIFICATIONUSED WITH HANDLING GEAR ON SEAWOLF CLASS
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES 2
580-6641123-ECHG-A11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
580-6641123Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C692-1603-ECHG-A11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C692-1603-ECHG-A11?
C692-1603-ECHG-A11 is a STOP,MECHANICAL.
What parts can replace C692-1603-ECHG-A11?
There are 2 known substitutes for C692-1603-ECHG-A11: 580-6641123-ECHG-A11, 580-6641123. Substitute compatibility should be verified for your specific system.
What is the NSN for C692-1603-ECHG-A11?
C692-1603-ECHG-A11 is cataloged in the U.S. Government catalog under NSN 5340-01-493-1722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C692-1603-ECHG-A11