PartsTable / O-RING / C69011
C69011
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CASE,CRYSTAL UNIT is a the manufacturer industrial component. Key specifications include material: METAL, component_name: CASE, locking_device: INCLUDED, outside_diameter: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3831, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
C69011
NSN: 5331-00-248-3831 FSC: 5331 — O-RINGCAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
material METAL component_name CASE locking_device INCLUDED outside_diameter 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN component_quantity 4 center_hole_diameter 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN component_controlling_agency DEFENSE ELECTRONICS SUPPLY CENTER component_identifying_number C69011 DRAWING NO. NSN 5331-00-248-3831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: C69011
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
DC500-2 Interchangeable interchangeable cross-reference
interchangeable
2 Interchangeable interchangeable cross-reference
interchangeable
ASHRAE 52.1 Interchangeable interchangeable cross-reference
interchangeable
44-166 Interchangeable interchangeable cross-reference
interchangeable
K10E44A Interchangeable interchangeable cross-reference
interchangeable
37902 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy C69011?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C69011?
C69011 is a CASE,CRYSTAL UNIT.
What parts can replace C69011?
There are 25 known substitutes for C69011: DC500-2, 2, ASHRAE 52.1 and 22 more. Substitute compatibility should be verified for your specific system.
Is C69011 still available?
C69011 is currently cancelled.