PartsTable
Technical Data Sheet
Download PDF

C668C9D — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C668C9D: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OVERALL, recess_angle: 100.0 DEGREES NOMINAL, hole_diameter: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN, overall_height: 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN, recess_diameter: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, outside_diameter: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-415-2134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C668C9D
NSN: 5310-00-415-2134
FSC: 5310 — Nuts and Washers
CAGE: 86044 — CALIFORNIA GASKET AND RUBBER CORPORATION DBA CALIFORNIA GAKET & RUBBER CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OVERALL
recess_angle100.0 DEGREES NOMINAL
hole_diameter0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
overall_height0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
recess_diameter0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
outside_diameter0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
style_designatorFINISHING
material_thickness0.010 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059,1/2 H MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-415-2134
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C668C9D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FINISHING
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,1/2 H MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
RECESS DIAMETER: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 301 OVERALL
•
HOLE DIAMETER: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
STYLE DESIGNATORFINISHING
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,1/2 H MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
RECESS DIAMETER0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301 OVERALL
HOLE DIAMETER0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
RECESS ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
CG599C9DSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C668C9D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C668C9D?
C668C9D is a WASHER,FINISHING.
What parts can replace C668C9D?
There is 1 known substitute for C668C9D: CG599C9D. Substitute compatibility should be verified for your specific system.
What is the NSN for C668C9D?
C668C9D is cataloged in the U.S. Government catalog under NSN 5310-00-415-2134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C668C9D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.