PartsTable
Technical Data Sheet
Download PDF

C5NN3N719A — BEARING,BALL,STEERING SHAFT

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C5NN3N719A: BEARING,BALL,STEERING SHAFT.

The BEARING,BALL,STEERING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_length: 1.0780 INCHES NOMINAL IN, special_features: W/SNAP RING,RETAINMENT WASHER AND FELT PACKING ON OD OF INNER RING, style_designator: STEERING SHAFT, flange_outside_diameter: 1.4060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-807-3185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C5NN3N719A
NSN: 3110-00-807-3185
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 00501 — NEW HOLLAND N.V.NC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.8750 INCHES NOMINAL IN
overall_length1.0780 INCHES NOMINAL IN
special_featuresW/SNAP RING,RETAINMENT WASHER AND FELT PACKING ON OD OF INNER RING
style_designatorSTEERING SHAFT
flange_outside_diameter1.4060 INCHES NOMINAL IN
NSN3110-00-807-3185
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C5NN3N719A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 1.4060 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STEERING SHAFT
•
BORE DIAMETER: 0.8750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FLANGE OUTSIDE DIAMETER1.4060 INCHES NOMINAL IN
STYLE DESIGNATORSTEERING SHAFT
OVERALL LENGTH1.0780 INCHES NOMINAL IN
SPECIAL FEATURESW/SNAP RING,RETAINMENT WASHER AND FELT PACKING ON OD OF INNER RING
BORE DIAMETER0.8750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 4
2805NN-3N719Reference document
Same NSN cross-reference
Reference document — Secondary reference
270194Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
871035Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
67871035Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C5NN3N719A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C5NN3N719A?
C5NN3N719A is a BEARING,BALL,STEERING SHAFT.
What parts can replace C5NN3N719A?
There are 4 known substitutes for C5NN3N719A: 2805NN-3N719, 270194, 871035 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C5NN3N719A?
C5NN3N719A is cataloged in the U.S. Government catalog under NSN 3110-00-807-3185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C5NN3N719A