PartsTable
Technical Data Sheet
Download PDF

C522924-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C522924-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6063 AND RUBBER SILICONE CLASS Q AND STEEL AND COPPER AND TIN OVERALL, hole_diameter: 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.500 INCHES NOMINAL IN, overall_length: 8.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, bolt_hole_quantity: 14. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-249-3087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C522924-1
NSN: 5330-01-249-3087
FSC: 5330 — Packing and Gasket Materials
CAGE: 11982 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6063 AND RUBBER SILICONE CLASS Q AND STEEL AND COPPER AND TIN OVERALL
hole_diameter0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.500 INCHES NOMINAL IN
overall_length8.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity14
cross-sectional_thickness0.156 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_width1.125 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length1.125 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-249-3087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C522924-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.156 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT HOLE QUANTITY: 14
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 1.125 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6063 AND RUBBER SILICONE CLASS Q AND STEEL AND COPPER AND TIN OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.156 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH8.500 INCHES NOMINAL IN
OVERALL WIDTH5.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY14
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH1.125 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6063 AND RUBBER SILICONE CLASS Q AND STEEL AND COPPER AND TIN OVERALL
HOLE DIAMETER0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH1.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C522924-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C522924-1?
C522924-1 is a GASKET.
What is the NSN for C522924-1?
C522924-1 is cataloged in the U.S. Government catalog under NSN 5330-01-249-3087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C522924-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.