PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C5-19-9439-2
C5-19-9439-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH,RIM is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, special_features: HOLE DIAMETER:0.330 IN.MIN,0.350 IN.MAX;CASE SHAPE:RECTANGULAR;HOLE SPACING:3.680 IN. C TO C IN, surface_treatment: PLASTIC CASE.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-310-7208, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C5-19-9439-2
NSN: 5340-01-310-7208
FSC: 5340
CAGE: 81361 — EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASE
special_featuresHOLE DIAMETER:0.330 IN.MIN,0.350 IN.MAX;CASE SHAPE:RECTANGULAR;HOLE SPACING:3.680 IN. C TO C IN
surface_treatmentPLASTIC CASE
mounting_hole_quantity2
NSN5340-01-310-7208
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C5-19-9439-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING CASE
•
MOUNTING HOLE QUANTITY: 2
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING CASE
MOUNTING HOLE QUANTITY2
SPECIAL FEATURESHOLE DIAMETER:0.330 IN.MIN,0.350 IN.MAX;CASE SHAPE:RECTANGULAR;HOLE SPACING:3.680 IN. C TO C IN
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
31620-1Upgraded Successor
successor cross-reference
successor
41966Interchangeable
interchangeable cross-reference
interchangeable
60510Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C5-19-9439-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C5-19-9439-2?
C5-19-9439-2 is a LATCH,RIM.
What parts can replace C5-19-9439-2?
There are 3 known substitutes for C5-19-9439-2: 31620-1, 41966, 60510. Substitute compatibility should be verified for your specific system.
What is the NSN for C5-19-9439-2?
C5-19-9439-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-310-7208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C5-19-9439-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026