PartsTable
Technical Data Sheet
Download PDF

C5-15-8014 — CABLE ASSEMBLY,RADIO FREQUENCY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C5-15-8014: CABLE ASSEMBLY,RADIO FREQUENCY.

The CABLE ASSEMBLY,RADIO FREQUENCY is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include width: 0.562 INCHES NOMINAL IN, height: 0.312 INCHES NOMINAL IN, material: ALUMINUM OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.140 INCHES NOMINAL IN, overall_width: 1.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-082-1052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C5-15-8014
NSN: 5340-00-082-1052
NIINs: 000821052, 013864820
FSC: 5340 — Hardware, Commercial
CAGE: 81361 — EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC (USA)
SPECIFICATIONS
width0.562 INCHES NOMINAL IN
height0.312 INCHES NOMINAL IN
materialALUMINUM OVERALL
design_typeLOOP ENGAGING
hole_diameter0.140 INCHES NOMINAL IN
hole_quantity2
overall_width1.187 INCHES NOMINAL IN
conductor_formSOLID SINGLE CONDUCTOR
overall_height0.468 INCHES NOMINAL IN
overall_length0.875 INCHES NOMINAL IN
operation_methodLEVER HANDLE
special_featuresPRESHAPED CABLE
NSN5340-00-082-1052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C5-15-8014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 2
•
DESIGN TYPE: LOOP ENGAGING
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER
•
CATCH STRIKE STYLE: MORTISE
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.468 INCHES NOMINAL IN
SURFACE HOLE QUANTITY2
DESIGN TYPELOOP ENGAGING
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORLEVER
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.875 INCHES NOMINAL IN
OVERALL WIDTH1.187 INCHES NOMINAL IN
HEIGHT0.312 INCHES NOMINAL IN
SURFACE HOLE DIAMETER0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
HC200AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C5-15-8014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C5-15-8014?
C5-15-8014 is a CABLE ASSEMBLY,RADIO FREQUENCY.
What parts can replace C5-15-8014?
There is 1 known substitute for C5-15-8014: HC200A. Substitute compatibility should be verified for your specific system.
What is the NSN for C5-15-8014?
C5-15-8014 is cataloged in the U.S. Government catalog under NSN 5340-00-082-1052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C5-15-8014