PartsTable
Technical Data Sheet
Download PDF

C4W1663-3 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C4W1663-3: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.191 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, first_counterbore_depth: 0.620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-864-8470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C4W1663-3
NSN: 5340-00-864-8470
FSC: 5340 — Hardware, Commercial
CAGE: 1C762 — DE HAVILLAND PARTS & AEROSTRUCTURES LIMITED DIV FIELD AVIATION (CAN)
SPECIFICATIONS
materialRUBBER
hole_diameter0.191 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
first_counterbore_depth0.620 INCHES NOMINAL IN
material_hardness_rating60.0 DUROMETER NOMINAL
first_counterbore_diameter0.500 INCHES NOMINAL IN
material_document_and_classificationMIL-R-6855, CLASS 2, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-864-8470
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C4W1663-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL HARDNESS RATING: 60.0 DUROMETER NOMINAL
•
FIRST COUNTERBORE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855, CLASS 2, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE
•
FIRST COUNTERBORE DEPTH: 0.620 INCHES NOMINAL IN
•
COLOR: BLACK
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.000 INCHES NOMINAL IN
MATERIAL HARDNESS RATING60.0 DUROMETER NOMINAL
FIRST COUNTERBORE DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855, CLASS 2, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH1.000 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
FIRST COUNTERBORE DEPTH0.620 INCHES NOMINAL IN
COLORBLACK
MATERIALRUBBER
HOLE DIAMETER0.191 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
C4W166-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C4W1663-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C4W1663-3?
C4W1663-3 is a BUMPER.
What parts can replace C4W1663-3?
There is 1 known substitute for C4W1663-3: C4W166-3. Substitute compatibility should be verified for your specific system.
What is the NSN for C4W1663-3?
C4W1663-3 is cataloged in the U.S. Government catalog under NSN 5340-00-864-8470. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C4W1663-3