PartsTable
Technical Data Sheet
Download PDF

C4TZ7120B — RETAINER AND ROLLERS,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C4TZ7120B: RETAINER AND ROLLERS,BEARING.

The RETAINER AND ROLLERS,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.1018 INCHES MINIMUM AND 1.1028 INCHES MAXIMUM IN, overall_width: 0.8400 INCHES MAXIMUM IN, outside_diameter: 1.7314 INCHES MINIMUM AND 1.7322 INCHES MAXIMUM IN, special_features: NOM. CAGE ID 1.235 IN.

IN, style_designator: RETAINER AND NEEDLE ROLLERS. This part is cataloged in the U.S. Government catalog under NSN 3110-00-493-3908, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C4TZ7120B
NSN: 3110-00-493-3908
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.1018 INCHES MINIMUM AND 1.1028 INCHES MAXIMUM IN
overall_width0.8400 INCHES MAXIMUM IN
outside_diameter1.7314 INCHES MINIMUM AND 1.7322 INCHES MAXIMUM IN
special_featuresNOM. CAGE ID 1.235 IN. IN
style_designatorRETAINER AND NEEDLE ROLLERS
retainer_piece_quantity1
retainer_fabrication_methodPRESSED
NSN3110-00-493-3908
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C4TZ7120B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: RETAINER AND NEEDLE ROLLERS
•
OUTSIDE DIAMETER: 1.7314 INCHES MINIMUM AND 1.7322 INCHES MAXIMUM IN
•
BORE DIAMETER: 1.1018 INCHES MINIMUM AND 1.1028 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
RETAINER PIECE QUANTITY: 1
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORRETAINER AND NEEDLE ROLLERS
OVERALL WIDTH0.8400 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.7314 INCHES MINIMUM AND 1.7322 INCHES MAXIMUM IN
SPECIAL FEATURESNOM. CAGE ID 1.235 IN. IN
BORE DIAMETER1.1018 INCHES MINIMUM AND 1.1028 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
RETAINER PIECE QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 5
D99079Reference document
Same NSN cross-reference
Reference document — Secondary reference
7451758Reference document
Same NSN cross-reference
Reference document — Secondary reference
99079Reference document
Same NSN cross-reference
Reference document — Secondary reference
227081Reference document
Same NSN cross-reference
Reference document — Secondary reference
SRA5304Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C4TZ7120B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C4TZ7120B?
C4TZ7120B is a RETAINER AND ROLLERS,BEARING.
What parts can replace C4TZ7120B?
There are 5 known substitutes for C4TZ7120B: D99079, 7451758, 99079 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C4TZ7120B?
C4TZ7120B is cataloged in the U.S. Government catalog under NSN 3110-00-493-3908. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C4TZ7120B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.