PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C496-1
C496-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, temp_rating: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, surface_treatment: ANODIZE OVERALL, elongation_percentage: 125 MAXIMUM, material_document_and_classification: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL, surface_treatment_document_and_classification: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-850-7910, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C496-1
NSN: 5330-00-850-7910
FSC: 5330
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
temp_rating-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
surface_treatmentANODIZE OVERALL
elongation_percentage125 MAXIMUM
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5330-00-850-7910
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C496-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
TEMP RATING: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
SURFACE TREATMENTANODIZE OVERALL
TEMP RATING-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
41396DInterchangeable
interchangeable cross-reference
interchangeable
75302Interchangeable
interchangeable cross-reference
interchangeable
40242Interchangeable
interchangeable cross-reference
interchangeable
800-540-1-2-15 HI-TEMP-BATTLE-SHInterchangeable
interchangeable cross-reference
interchangeable
WA-1860Interchangeable
interchangeable cross-reference
interchangeable
22322901Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C496-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C496-1?
C496-1 is a GASKET.
What parts can replace C496-1?
There are 7 known substitutes for C496-1: 41396D, 75302, 40242 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C496-1?
C496-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-850-7910. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C496-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026