PartsTable
Technical Data Sheet
Download PDF

C4893-012 — RECEPTACLE,FRICTION CATCH STUD

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C4893-012: RECEPTACLE,FRICTION CATCH STUD.

The RECEPTACLE,FRICTION CATCH STUD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, special_features: HOLE DIA 0.100/0.110 IN.;O/A HGT 0.222/0.242 IN.;LGTH 0.955/0.986 IN. IN, surface_treatment: PHOSPHATE OVERALL, material_thickness: 0.012 INCHES NOMINAL IN, center_to_center_distance_between_mounting_holes: 0.685 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-324-7705, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C4893-012
NSN: 5340-00-324-7705
FSC: 5340 — Hardware, Commercial
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
special_featuresHOLE DIA 0.100/0.110 IN.;O/A HGT 0.222/0.242 IN.;LGTH 0.955/0.986 IN. IN
surface_treatmentPHOSPHATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes0.685 INCHES NOMINAL IN
NSN5340-00-324-7705
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C4893-012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 0.685 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES0.685 INCHES NOMINAL IN
OVERALL WIDTH0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
SPECIAL FEATURESHOLE DIA 0.100/0.110 IN.;O/A HGT 0.222/0.242 IN.;LGTH 0.955/0.986 IN. IN
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
C4893-012-4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
K36G0001-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy C4893-012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C4893-012?
C4893-012 is a RECEPTACLE,FRICTION CATCH STUD.
What parts can replace C4893-012?
There are 2 known substitutes for C4893-012: C4893-012-4, K36G0001-1. Substitute compatibility should be verified for your specific system.
What is the NSN for C4893-012?
C4893-012 is cataloged in the U.S. Government catalog under NSN 5340-00-324-7705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C4893-012

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.