PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C460824
C460824 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: DISHED HEXAGON, head_height: 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.287 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-162-7258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C460824
NSN: 5305-01-162-7258
FSC: 5305
CAGE: 54418 — MILTOPE CORPORATION (USA)
SPECIFICATIONS
head_styleDISHED HEXAGON
head_height0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
thread_length0.250 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.287 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.500 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
screw_material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
NSN5305-01-162-7258
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C460824 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: DISHED HEXAGON
•
HEAD HEIGHT: 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD LENGTH: 0.250 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.287 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEDISHED HEXAGON
HEAD HEIGHT0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW MATERIALSTEEL CORROSION RESISTING
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.250 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL IN
FASTENER LENGTH0.287 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
VK20BA390JInterchangeable
interchangeable cross-reference
interchangeable
7591028P0108Interchangeable
interchangeable cross-reference
interchangeable
8123T1AADC0G0390JInterchangeable
interchangeable cross-reference
interchangeable
460824Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C460824?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C460824?
C460824 is a SCREW,MACHINE.
What parts can replace C460824?
There are 4 known substitutes for C460824: VK20BA390J, 7591028P0108, 8123T1AADC0G0390J and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C460824?
C460824 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-162-7258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C460824

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026