PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C42622
C42622 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The CUTTER,MILLING,END is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE SEALING ELEMENT, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, case_style: RECESSED, seal_width: 0.971 INCHES NOMINAL IN, body_height: 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-306-9580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C42622
NSN: 3455-00-306-9580
FSC: 3455
CAGE: 1NEX4 — KENNAMETAL INC. DIV KENNAMETAL INDUSTRIAL PRODUCTS GROUP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE SEALING ELEMENT
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
case_styleRECESSED
seal_width0.971 INCHES NOMINAL IN
body_height0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
design_typeNONREUSABLE
body_diameter13.884 INCHES NOMINAL IN
body_materialMETAL
inclosure_typeENCASED
outside_diameter6.025 INCHES NOMINAL IN
special_featuresINCLUDES ONE END CAP W/ GASKET AND 0.660 IN. DIA BOLT HOLE IN
NSN3455-00-306-9580
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,END TITLE COMPONENT PN C42622 MFR CUTTER,MILLING,END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
MS51069RC53-2Interchangeable
interchangeable cross-reference
interchangeable
MS51069RC538-2Interchangeable
interchangeable cross-reference
interchangeable
28533Interchangeable
interchangeable cross-reference
interchangeable
NH42680Interchangeable
interchangeable cross-reference
interchangeable
44383Interchangeable
interchangeable cross-reference
interchangeable
MB2860P-STDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C42622?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C42622?
C42622 is a CUTTER,MILLING,END.
What parts can replace C42622?
There are 28 known substitutes for C42622: MS51069RC53-2, MS51069RC538-2, 28533 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C42622?
C42622 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-306-9580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C42622

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026