PartsTable
Technical Data Sheet
PartsTable / O-RING / C4072525AL
C4072525AL ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.362 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN, center_hole_diameter: 1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-631-1342, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C4072525AL
NSN: 5331-00-631-1342
FSC: 5331 — O-RING
CAGE: A1508 — RHEINMETALL ITALIA SPA (ITA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.362 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN
center_hole_diameter1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-631-1342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C4072525AL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.362 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.362 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.233 INCHES MINIMUM AND 1.245 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
300806Interchangeable
interchangeable cross-reference
interchangeable
6S6-120VInterchangeable
interchangeable cross-reference
interchangeable
8017/21-03-5 GR EEN 120V 60HZInterchangeable
interchangeable cross-reference
interchangeable
656-120/125VInterchangeable
interchangeable cross-reference
interchangeable
AS568-026 D7Interchangeable
interchangeable cross-reference
interchangeable
2-026Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C4072525AL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C4072525AL?
C4072525AL is a O-RING.
What parts can replace C4072525AL?
There are 20 known substitutes for C4072525AL: 300806, 6S6-120V, 8017/21-03-5 GR EEN 120V 60HZ and 17 more. Substitute compatibility should be verified for your specific system.
Is C4072525AL still available?
C4072525AL is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C4072525AL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026