The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 12.380 INCHES NOMINAL IN, first_leg_length: 2.810 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-171-8740, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
C3525-1
NSN:5340-01-171-8740 FSC:5340 — Hardware, Commercial CAGE:76359 — MILSCO MFG CO UNIT OF JASON INC (USA)
SPECIFICATIONS
material
STEEL
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
12.380 INCHES NOMINAL IN
first_leg_length
2.810 INCHES NOMINAL IN
second_leg_style
SQUARE
second_leg_width
12.380 INCHES NOMINAL IN
special_features
CUT OUT ON FIRST LEG,0.380 RADIUS,0.470 IN. LG; LEFT HANDED IN
style_designator
ANGLE
second_leg_length
3.460 INCHES MINIMUM AND 3.540 INCHES MAXIMUM IN
mounting_hole_type
PLAIN
first_leg_thickness
0.104 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
NSN
5340-01-171-8740
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.560 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.438 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 9.980 INCHES MINIMUM AND 10.020 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 12.380 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 3.460 INCHES MINIMUM AND 3.540 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.560 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.438 INCHES NOMINAL IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
9.980 INCHES MINIMUM AND 10.020 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.562 INCHES NOMINAL IN
SECOND LEG WIDTH
12.380 INCHES NOMINAL IN
SECOND LEG LENGTH
3.460 INCHES MINIMUM AND 3.540 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
TWO HOLES
STYLE DESIGNATOR
ANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C3525-1?
C3525-1 is a BRACKET,ANGLE.
What parts can replace C3525-1?
There is 1 known substitute for C3525-1: 9D4253. Substitute compatibility should be verified for your specific system.
What is the NSN for C3525-1?
C3525-1 is cataloged in the U.S. Government catalog under NSN 5340-01-171-8740. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.