PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C3234-020-16
C3234-020-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.375 INCHES NOMINAL IN, length: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.178 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, features_provided: CUSHION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-559-8763, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C3234-020-16
NSN: 5340-00-559-8763
FSC: 5340
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
length1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.178 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
features_providedCUSHION
surface_treatmentPHOSPHATE OVERALL
material_thickness0.020 INCHES NOMINAL IN
distance_from_base_to_lip0.020 INCHES NOMINAL IN
distance_from_end_to_hole_nearest_loop0.250 INCHES NOMINAL IN
NSN5340-00-559-8763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C3234-020-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.178 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
DISTANCE FROM END TO HOLE NEAREST LOOP: 0.250 INCHES NOMINAL IN
•
WIDTH: 0.375 INCHES NOMINAL IN
•
LENGTH: 1.000 INCHES NOMINAL IN
•
DISTANCE FROM BASE TO LIP: 0.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
HOLE DIAMETER0.178 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DISTANCE FROM END TO HOLE NEAREST LOOP0.250 INCHES NOMINAL IN
WIDTH0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.250 INCHES NOMINAL IN
LENGTH1.000 INCHES NOMINAL IN
DISTANCE FROM BASE TO LIP0.020 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE OVERALL
FEATURES PROVIDEDCUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
20521Upgraded Successor
successor cross-reference
successor
06-08906Interchangeable
interchangeable cross-reference
interchangeable
272-1050P1Interchangeable
interchangeable cross-reference
interchangeable
E5632-102-9NInterchangeable
interchangeable cross-reference
interchangeable
13217E4066-1Interchangeable
interchangeable cross-reference
interchangeable
20714Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C3234-020-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C3234-020-16?
C3234-020-16 is a CLIP,SPRING TENSION.
What parts can replace C3234-020-16?
There are 6 known substitutes for C3234-020-16: 20521, 06-08906, 272-1050P1 and 3 more. Substitute compatibility should be verified for your specific system.
Is C3234-020-16 still available?
C3234-020-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C3234-020-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026