PartsTable
Technical Data Sheet
Download PDF

C3226033A — GEAR,BEVEL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

C3226033A: GEAR,BEVEL.

The GEAR,BEVEL is a the manufacturer industrial component. Key specifications include body_style: PLAIN, SOLID, teeth_type: SPIRAL, pitch_diameter: 7.0000 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES, tooth_direction: RIGHT, style_designator: PERIPHERAL FACE, BACK HUB PROTRUDING. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-540-1556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C3226033A
NSN: 3020-00-540-1556
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 71400 — COOPER BUSSMANN, LLC DBA COOPER INDUSTRIES (USA)
SPECIFICATIONS
body_stylePLAIN, SOLID
teeth_typeSPIRAL
pitch_diameter7.0000 INCHES NOMINAL IN
pressure_angle14.5000 DEGREES
tooth_directionRIGHT
style_designatorPERIPHERAL FACE, BACK HUB PROTRUDING
attachment_methodMOUNTING HOLE
face_nominal_width1.219 INCHES IN
hub_nominal_diameter2.125 INCHES SECOND END IN
nominal_overall_length1.500 INCHES IN
nominal_outside_diameter6.2500 INCHES IN
nominal_distance_from_bore_center_to_keyway_bottom0.8906 INCHES BOTH ENDS IN
NSN3020-00-540-1556
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,BEVEL TITLE COMPONENT PN C3226033A MFR GEAR,BEVEL
KEY FEATURES
•
HUB NOMINAL DIAMETER: 2.125 INCHES SECOND END IN
•
BODY STYLE: PLAIN, SOLID
•
TOOTH DIRECTION: RIGHT
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.125 INCHES SECOND END IN
•
TEETH TYPE: SPIRAL
•
NOMINAL OVERALL LENGTH: 1.500 INCHES IN
•
STYLE DESIGNATOR: PERIPHERAL FACE, BACK HUB PROTRUDING
•
PITCH DIAMETER: 7.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HUB NOMINAL DIAMETER2.125 INCHES SECOND END IN
BODY STYLEPLAIN, SOLID
TOOTH DIRECTIONRIGHT
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.125 INCHES SECOND END IN
TEETH TYPESPIRAL
NOMINAL OVERALL LENGTH1.500 INCHES IN
STYLE DESIGNATORPERIPHERAL FACE, BACK HUB PROTRUDING
PITCH DIAMETER7.0000 INCHES NOMINAL IN
NOMINAL OUTSIDE DIAMETER6.2500 INCHES IN
NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM0.8906 INCHES BOTH ENDS IN
OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3020-00-000-0091 3020-00-001-0027 3020-00-001-0028 3020-00-001-0063 3020-00-001-0064 3020-00-001-0066 3020-00-001-0071 3020-00-001-0072
SUBSTITUTES & CROSS-REFERENCES 3
16300176Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
C3226033REVASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ADH1721CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C3226033A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C3226033A?
C3226033A is a GEAR,BEVEL.
What parts can replace C3226033A?
There are 3 known substitutes for C3226033A: 16300176, C3226033REVA, ADH1721C. Substitute compatibility should be verified for your specific system.
What is the NSN for C3226033A?
C3226033A is cataloged in the U.S. Government catalog under NSN 3020-00-540-1556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C3226033A