PartsTable
Technical Data Sheet
Download PDF

C3116-4M6S — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C3116-4M6S: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL SHAFT, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 2.3440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-058-1663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C3116-4M6S
NSN: 3110-00-058-1663
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL SHAFT
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.2500 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length2.3440 INCHES NOMINAL IN
shank_diameter0.3750 INCHES NOMINAL IN
inner_ring_width0.5930 INCHES NOMINAL IN
outer_ring_width0.4375 INCHES NOMINAL IN
special_features0.980 IN. W 0.670 IN. DEEP @KEYWAY PER NAS 513,FILL 40 TO 50 PCT WITH SPECIFIED LUBRICANT IN
style_designatorDOUBLE ROW, STAGGERED, BALL
NSN3110-00-058-1663
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C3116-4M6S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.3750 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.1250 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE ROW, STAGGERED, BALL
•
OVERALL OUTSIDE DIAMETER: 0.9380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.3750 INCHES NOMINAL IN
SHANK THREAD LENGTH1.1250 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4375 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ROW, STAGGERED, BALL
OVERALL LENGTH2.3440 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.9380 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
Q1001-4-09Reference document
Same NSN cross-reference
Reference document — Secondary reference
RAP4M6-3E9107AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C3116-4M6S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C3116-4M6S?
C3116-4M6S is a BEARING,BALL,ROD END.
What parts can replace C3116-4M6S?
There are 2 known substitutes for C3116-4M6S: Q1001-4-09, RAP4M6-3E9107A. Substitute compatibility should be verified for your specific system.
What is the NSN for C3116-4M6S?
C3116-4M6S is cataloged in the U.S. Government catalog under NSN 3110-00-058-1663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C3116-4M6S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.