C3110-1 — GEAR,SPUR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

C3110-1: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, body_style: PLAIN, SOLID, bore_style: STRAIGHT SPLINE BOTH ENDS, pitch_diameter: 2.0000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 40. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-283-9716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

C3110-1

NSN: 3020-01-283-9716
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 52906 — EATON AEROSPACE LLC STERER ENGINEERING MORGAN ACTUATORS (USA)

SPECIFICATIONS

material	STEEL COMP 1018 OVERALL
body_style	PLAIN, SOLID
bore_style	STRAIGHT SPLINE BOTH ENDS
pitch_diameter	2.0000 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
teeth_quantity	40
spline_quantity	6 BOTH ENDS
special_features	BODY RECESSED FIRST END 0.170IN. DEEP 1.000 IN.DIA IN
style_designator	PROTRUDING HUBS
face_nominal_width	0.380 INCHES IN
hub_nominal_diameter	1.500 INCHES FIRST END IN
hub_style_designator	PLAIN BOTH ENDS
NSN	3020-01-283-9716

COMPONENT DIAGRAM

KEY FEATURES

•

BORE NOMINAL DIAMETER: 0.577 INCHES BOTH ENDS IN

•

HUB NOMINAL DIAMETER: 1.500 INCHES FIRST END IN

•

TEETH QUANTITY: 40

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: STRAIGHT SPLINE BOTH ENDS

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.160 INCHES SECOND END IN

TECHNICAL CHARACTERISTICS

BORE NOMINAL DIAMETER	0.577 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER	1.500 INCHES FIRST END IN
HUB NOMINAL DIAMETER	1.000 INCHES SECOND END IN
TEETH QUANTITY	40
BODY STYLE	PLAIN, SOLID
BORE STYLE	STRAIGHT SPLINE BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.160 INCHES SECOND END IN
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.090 INCHES FIRST END IN
STYLE DESIGNATOR	PROTRUDING HUBS
PITCH DIAMETER	2.0000 INCHES NOMINAL IN

OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3020-00-000-0091 3020-00-001-0027 3020-00-001-0028 3020-00-001-0063 3020-00-001-0064 3020-00-001-0066 3020-00-001-0071 3020-00-001-0072

SUBSTITUTES & CROSS-REFERENCES 1

C3110Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy C3110-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is C3110-1?

C3110-1 is a GEAR,SPUR.

What parts can replace C3110-1?

There is 1 known substitute for C3110-1: C3110. Substitute compatibility should be verified for your specific system.

What is the NSN for C3110-1?

C3110-1 is cataloged in the U.S. Government catalog under NSN 3020-01-283-9716. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

C3110-1 — GEAR,SPUR

Request a Quote — C3110-1